LED Power Supply / Transformer 24V Non Dimmable
The Glacial electronic transformer is a safe and highly efficient power supply for LED Strip lighting with standby no-load consumption less than 0.5W. For short length of strip lights from a few cm to 5 meters, this small and compact driver will power up any 24V led circuit.
Even for 6w-7.2w LED Strips it is recommended to use an overrated power supply at 36 Watt.
We use a quality plastic enclosure with screw terminals, that simplifies the installation procedure eliminating the need for special connectors and tools. Despite the small footprint of the drivers, the circuitry is quite advanced. Over voltage and short circuit protection are inherent in every power supply.
This power supply will energise LED ribbons up to 5m long.
101 x 44.3 x 25 mm (L*W*H)
- Universal AC Input Range 90~ 264VAC
- Class 2 Power Supply Unit
- Constant Voltage Design (CV mode)
- Fully isolated plastic case
- Protections: OCP/ SCP
- No Load Consumption＜0.5W at 230VAC
- The operating temperature of the driver is: ‐10°C ~ 40°C full load
- Technical Specs
DC Voltage Range
Rated Max. Power
Ripple & Noise (Max.) note.2
85% at 230VAC full load
Set up Time (Max)
< 1S / 115VAC at full load / < 0.5S / 230VAC at full load
100 ‐ 240VAC
47 Hz ~ 63 Hz
AC Current (Max.)
1A at 115VAC /0.5A at 230VAC
Inrush Current (Max.)
< 30A at 115VAC /< 60A at 230VAC
< 0.25mA / 240VAC
No Load Consumption
＜0.5W at 230VAC
110% ‐ 150% Constant current limiting, auto‐recovery
Hiccup mode, recovers automatically after fault condition is removed
Shut down o/p voltage, recovers automatically after temperature goes
Protection type: Shut down o/p voltage, recovers automatically after voltage goes down.
‐20°C ~ 40°C (Refer to output load derating curve)
20% ~ 90% RH non‐condensing.
Storage Temp & Humidity
‐20 ~ +80°C ,10% ~ 90% RH
Safety & EMC
I/P ‐ O/P: 3.75K VAC
I/P ‐ O/P: 100M ohms / 500VDC at 25°C
EMI Conduction & radiation
meet Compliance to EN55015; FCC PART15 CLASSB
meet Compliance to EN61000‐4‐2,3,4,5,6,11;EN61547,EN61000‐3‐2 CLASS C
UL rated, 18 AWG x 2 C ( 150 mm)
UL rated, 18 AWG x 2 C ( 150 mm)
100K hours min. @Ta=25 °C
Dimension (L x W x H)
110 x 35 x 25mm; 155g/pcs
- All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C ambient temperature.
- Ripple & Noise are measured at 20MHZ bandwidth oscilloscope and with 0.1uF & 47uF parallel capacitor.
- The power supply is considered a component which will be installed a final equipment. The final equipment must be re‐confirmed that it still meets EMC directives.
- Delivery & Returns
The usual delivery time of online order is 24-48hours, subject to the availability of stock.
If your order is out of stock, the lead time of delivery will be 7-10 working days. This situation does not include a mandatory info to the client.
Bulk orders of LED Lights (up to 3,000pcs) can be delivered within 10-12 up to 30 working days (subject to the type of the LED product). This situation does include a mandatory info to the client.
However, we do keep stock in our warehouse for almost every LED product.
An easy to use secure online payment system + other payment options (see below).
Payments by Bank Transfer, Purchase Orders or Cheques will NOT incur any processing costs.
Please note that all our LED products (except batteries - 3-year warranty) supplied come with a 5-year manufacturer warranty.
We want you to be entirely happy with your purchases from us. If you change your mind after placing your order you can cancel at any time before the goods are despatched, regardless of the reason. There is no cost for cancelling your order before despatch.
We advise you check the products as soon as they are delivered so that any problems can be raised with the delivery drivers immediately. We also allow 14 days from the day following your delivery to let us know if you find you want to return your product(s) as long as they are unused.
Please Note - you are responsible for the cost of returning unwanted/cancelled items to us and for the value of the goods if they are diminished as a result of your handling whilst with you or in the return transit to us. Please take care of them and package them well.
RETURNS MATERIAL AUTHORISATION
If you want to return any of your items, please follow the instructions below:
An RMA (Returns Material Authorisation)number must be obtained prior to returning any goods by calling Customer Services on 02477 675 575 or by e-mail on [email protected] .
If there is a problem with the product, you will need to provide a full fault/damage description when ringing/e-mailing for your RMA number.
The RMA number must be clearly marked on the outer transit packaging of your return. Do not write on or mark the product packaging.
Please, enclose a copy of your invoices, if possible.
You can return items at no cost and with no reasons within 14 days after delivery, provided they will be returned in the same condition as when received them.
If the items you want to return are damaged in transit on the way to you or they are faulty (14 or 30 days after the delivery) all the return shipping will be at Voltcon’s costs.
If you returned claimed faulty items and on our inspection they prove to be in good order, we will surcharge you a fixed fee of £30.00 for testing time, repackaging and reshipping.
If you want to return the items for any other reasons outside 30 days after the delivery (a restock and handling fee of 20% will apply on gross subtotal value of order), including for claims under warranty, all the return shipping will be at your costs.
Make sure the item is adequately protected to prevent any damage. Voltacon cannot be held responsible for any damage to goods returned without adequate protective packaging.