LED Strip kit 24V SMD2835, 18W/meter, single colour


SKU: 601005

LED Strip kit 24V SMD2835, 18W/meter, single colour
  • Buy 6 for £5.72 each and save 4%
  • Buy 12 for £5.55 each and save 6%
  • Buy 24 for £5.43 each and save 8%
192 LEDs per meter, IP33 enhanced protection for indoor use. 2800LM/M. Ultra Bright


LED Strip Light Kit. 18W/Meter. IP33 Indoor Tape. Ultra Bright

Consistent light from the first to the last LED-Chips. Spot-free, even dispersion of light

Available in cuttable rolls of 1m, 3m and 5meters

Strips are the pinnacle of LED lighting, they are affordable, trully flexible and easy to install. LED Strips are suitable for decorative splashes or as general and accent light in offices and homes.

We have added in the box all the accessories and connectors for a plug'n'play job. The strong 3M self-adhesive tape at the back make the installation easy. 

The strip lights of Ledison are extremely durable since we use commercial grade materials. There are 192 LED chips per meter of SMD2835 technology for intense, smooth and even light distribution. More importantly, there is no colour difference between different rolls. If you combine one or more strip lights from the same colour temperature, they will look exactly the same. 

Using the designated cutting areas, the strip can be cut every 8 LEDs. A pair of sharp scissor is required to cut on the marked line. If you do not follow the line the electrical conductivity will be lost.

Cable connectors for 10mm tape are included with your purchase.

Picture: Close up image of the 192 LEDs per meter, cuttable every 8 SMD chips

Power Supply Requirements

According to the meters that you will use and the layout of the installation you will require the following powe supplies

60Watt Power Supply to run the up to 3 meters length of the LED array. For 5 meters, the 100W PSU is required.

Notice : It is very important to have a clean, smooth surface for the adhesive bonding to work

Ultra Efficient and Bright

  • Resistant to any bending radius
  • Bright LEDs with pure gold wire (99.99%)
  • 2800 luminous flux
  • Pure copper double layer with white paint finish. 
  • 5 Year warranty offered as standard

The benefits of 24V System

The higher the DC voltage the lower the current (amps) that entails less power losses and more efficient system. The 12V LED tapes require double amount of amperage, the voltage drop influences the performane of the lighting system. 

The 24V in perfectly tuned to run long single piece of LED strip up to 30 meters with as single power supply. 

Accurate Rendering 

A quality light source should accurately render all the frequencies of the colour spectrum when it is compared to the perfect light of the same colour temperature. The picture below is selft explanatory. Our lights show realistically and naturally object colours.


Technical Specs


LED Strip

Luminous flux:

2800 lumen / meter


18 Watt

Color Rendering index:



24 Volts DC

Typical efficiency:



1-3-5 Meters

Beam Angle:


Lasts up to 

50,000 hours







Warm white:


SMD pcs/m


Natural white:




Cool white:



5 years

Operating Temp:

-25 OC to 50 OC


TUV, ROHS Compliant, CE, UL


Cable Connectors

Fast connection between two LED strips with 10mm width. Special electrical tools are not required. The connectors are insulated and provide protection of any risk of electrical hazard.

The red-case power blocks are suitable for 22-18AWG wires, they support mains voltage up to 240VAC. There is no need for stripping the cables, eliminating the risk of exposed wires. 

Delivery & Returns

The usual delivery time of online order is 24-48hours, subject to the availability of stock. 

If your order is out of stock, the lead time of delivery will be 7-10 working days. This situation does not include a mandatory info to the client.

Bulk orders of LED Lights (up to 3,000pcs) can be delivered within 10-12 up to 30 working days (subject to the type of the LED product). This situation does include a mandatory info to the client.

However, we do keep stock in our warehouse for almost every LED product.

We offer:

An easy to use secure online payment system + other payment options (see below).

Payments by Bank Transfer, Purchase Orders or Cheques will NOT incur any processing costs. 

Please note that all our LED products (except batteries - 3-year warranty) supplied come with a 5-year manufacturer warranty.

Cancellation Policy

We want you to be entirely happy with your purchases from us. If you change your mind after placing your order you can cancel at any time before the goods are despatched, regardless of the reason. There is no cost for cancelling your order before despatch.

After Delivery

We advise you check the products as soon as they are delivered so that any problems can be raised with the delivery drivers immediately. We also allow 14 days from the day following your delivery to let us know if you find you want to return your product(s) as long as they are unused.

Please Note - you are responsible for the cost of returning unwanted/cancelled items to us and for the value of the goods if they are diminished as a result of your handling whilst with you or in the return transit to us. Please take care of them and package them well.


If you want to return any of your items, please follow the instructions below:

An RMA (Returns Material Authorisation)number must be obtained prior to returning any goods by calling Customer Services on 02477 675 575 or by e-mail on [email protected] .

If there is a problem with the product, you will need to provide a full fault/damage description when ringing/e-mailing for your RMA number.

The RMA number must be clearly marked on the outer transit packaging of your return. Do not write on or mark the product packaging.

Please, enclose a copy of your invoices, if possible.

You can return items at no cost and with no reasons within 14 days after delivery, provided they will be returned in the same condition as when received them.

If the items you want to return are damaged in transit on the way to you or they are faulty (14 or 30 days after the delivery) all the return shipping will be at Voltcon’s costs.

If you returned claimed faulty items and on our inspection they prove to be in good order, we will surcharge you a fixed fee of £30.00 for testing time, repackaging and reshipping.

If you want to return the items for any other reasons outside 30 days after the delivery (a restock and handling fee of 20% will apply on gross subtotal value of order), including for claims under warranty, all the return shipping will be at your costs.

Make sure the item is adequately protected to prevent any damage. Voltacon cannot be held responsible for any damage to goods returned without adequate protective packaging.


How do you rate this product? *

1 1 star
2 2 star
3 3 star
4 4 star
5 5 star

Be the first to review this product